Clicky

-50flat0sharp+50
Mic audio never leaves your device. All detection runs in your browser.
Too loud for the mic? Tap a course to hear its reference tone and tune by ear.

How to tune a mandolin cleanly

Tune one course at a time. The paired strings reinforce each other and give a strong, clean signal.

1

Start with the A course

The A course at 440 Hz is the standard concert pitch reference. Tune it first, then tune the other courses outward in fifths: D below, E above, G below D.

2

Pluck or strum one course

Let both strings in the course ring together. The tuner reads the combined fundamental, which is actually cleaner than a single string because the pair reinforces it.

3

Centre the needle on green

Flat is to the left, sharp is to the right. Adjust the machine head until the needle centres and turns green. Within two cents is accurate enough for any setting.

4

Match the two strings in each course

Once a course reads in tune, listen for whether the two strings beat against each other. If they do, mute one string and tune the other until the beat disappears. Then check the course together again.

Mandolin courses, notes and frequencies

Mandolin is tuned GDAE in perfect fifths, identical to violin. Each course is a pair of strings at the same pitch.

CourseNoteFrequency (per string)
G (4th)G3196.00 Hz × 2
D (3rd)D4293.66 Hz × 2
A (2nd)A4440.00 Hz × 2
E (1st)E5659.25 Hz × 2
Free Download

The Tempo & Delay Cheat Sheet

Tuned up and recording? Keep this one-page reference by the desk — genre tempos and tempo-synced delay times, all on a page.

  • Tempo ranges for 16 genres
  • Delay times for every common BPM
  • The dotted-eighth and triplet values pros actually use
  • Reverb pre-delay and LFO sync tricks

Get the cheat sheet

Free. Straight to your inbox.

No spam. Unsubscribe anytime.

Check your inbox.
Confirm your email and the cheat sheet is yours. See you in there.

Questions, answered

How does the tuner handle the paired courses?

Both strings in a course sound the same pitch, so they reinforce the fundamental and actually give a stronger, cleaner signal than a single string would. The tuner reads this correctly.

My two strings within a course are slightly out with each other — how do I fix it?

Mute one string in the pair and tune the other with the tuner. Then mute that string and tune the second one. When both are right, pluck them together — the beating sound will disappear.

Does it work for mandola and mandocello?

Yes. Mandola is tuned CGDA and mandocello CGDA an octave lower. Use the Chromatic Tuner and tune each course to its target note.

Do I need to download anything?

No. The tuner runs entirely in your browser. Mic audio is processed locally and never uploaded or stored.

Scroll to Top